Skip to main content
PhuAir
HomeTechnical Center

Technical Articles

268 articles

Bảo dưỡng máy nén khí Kobelco AG370Troubleshooting

Instructions for checking and replacing air compressor minimum pressure valve

Air compressor bearing errors are one of the errors that are easy to detect, because when this error occurs, the machine will operate abnormally and make strange sounds.

30/3/20202715
Khắc phục sự cố máy nén khí Kobelco AG370Troubleshooting

What to do when the Kobelco air compressor does not produce air?

If in case of emergency use, start the compressor after adjusting according to the steps below. The ITCS screen can save the last 4 errors.

30/3/20204142
Hướng dẫn vận hành máy nén khí Kobelco AG370Troubleshooting

Warning symbols on Kobelco air compressors that you need to know

To ensure that Hitachi air compressors operate well and with high efficiency throughout their operation, every business needs regular maintenance to ensure technical and safety for users as well as for the business. The following is the periodic maintenance process of Hitachi air compressors that Minh Phu would like to introduce to readers:

30/3/20204745
Phụ tùng máy nén khí Boge - CHLB ĐứcTroubleshooting

Causes and solutions to problems with Atlas Copco GA37, GA45, GA 55, GA 75 air compressors

The BOGE brand has been around since 1907 in Germany. BOGE is the number 1 air compressor brand in Germany and holds a high market share in the world. In Vietnam, the BOGE brand has been around since 1995 and is increasingly strengthening its position in a number of important industries.

14/3/20205117
Phạm vi sử dụng máy FushengTroubleshooting

Instructions for checking and replacing air compressor minimum pressure valve

Air compressor bearing errors are one of the errors that are easy to detect, because when this error occurs, the machine will operate abnormally and make strange sounds.

11/1/20201256
Các ứng dụng trong máy nén FushengTroubleshooting

Applications in Fusheng compressors

According to the allowable operating range of Fusheng air compressors, the operating conditions in air-cooled or heat pump applications are more critical than air-cooled: the load of the former is about 15-30% higher than the latter causing high discharge temperature, coil temperature and oil temperature. For the compressor to run normally, it is necessary to install a liquid injection system or an oil cooler to cool the compressor.

11/1/20203589
Khắc phục sự cố và bảo dưỡng định kì máy nén khí trục vítTroubleshooting

Troubleshooting and periodic maintenance of screw air compressors

In order for machines to operate efficiently and for a long time, each business, factory, or factory needs to have a plan for a regular maintenance schedule for its equipment and assets.

11/1/20201772
Thông số điện máy nén khí FushengTroubleshooting

Maintain compressed air systems

During Y-Δ transfer, the solenoid transfer time should be set to 40 ms. The possibility of arc rejection should be considered when setting  transfer times. After completing the entire start-up procedure, note the coolant temperature.

11/1/20201467
Kiểm tra máy nén trước khi khởi độngTroubleshooting

Check the compressor before starting

Before operating the air compressor, technicians need to ensure technical safety principles and requirements before operating, such as: checking the power source, checking the installation position, pressure and condition of the machine.

11/1/20202386
Thông số kỹ thuật máy nén Fusheng SR seriesTroubleshooting

Technical specifications of Fusheng SR series compressor

Before installing the attachment, use the adapter at the suction inlet to release Nitrogen The charged Nitrogen inside the compressor (0.5 bar). New compressors are filled with  lubricants in the factory before delivery.

27/12/20196015
4 bước kiểm soát công suất máy nén Fusheng series SRTroubleshooting

4 steps to control the capacity of Fusheng series SR compressor

One of the most commonly used devices in manufacturing businesses, factories, and industrial zones is various air compressor systems. Therefore, to achieve high work efficiency as well as good productivity, every business needs to set up and manage a Fusheng air compressor capacity control system.

27/12/20193642
Cấu tạo máy nén khí Fusheng trục vít SR seriesTroubleshooting

Structure of Fusheng SR series screw air compressor

Structure of Fusheng SR series screw air compressor

27/12/20191952